Put an absolute polished razor edge on any knife…in only seconds!
- The Razor Sharp Edgemaking System consists of two compressed paper wheels that will fit on any buffer or bench grinder.
- One wheel is coated with 180 grit Silicon Carbide and is used to develop a burr or wire-edge along the cutting edge.
- The included Conditioning Wax (a special formula of fats, oils and waxes) is applied to the grit wheel to lubricate and control heat.
- The second wheel is slotted and, with the help of the included jeweler’s rouge, is used to remove burrs and polish the cutting edge.
- A grit wheel will sharpen a couple hundred knives before it needs recoating.
- An additional 3oz container of Silicon Carbide is provided with the kit, enough to recoat the grit wheel 15 to 20 times.
- Complete instructions are included in each kit.
- Wheels are available in 8″ or 10″ diameters.
- If you are using a 6″ bench grinder, you want the 8″ Deluxe kit.
- The reason for this is that in order to sharpen a knife properly, you must have enough clearance between the face of the wheel and the face of the motor housing to accommodate the handle and your fingers.
- If you are using an 8″ bench grinder, you want the 10″ Deluxe kit.
Kit Includes:
- 1 each – 10″ Grit Coated Wheel
- 1 each – 10″ Slotted Wheel
- 1 each – 2oz. jar of 180 grit Silicon Carbide
- 1 each – Chrome Polishing Compound “cake”
- 1 each – Conditioning Wax
You now own the world’s best sharpening system – it will put a great edge on almost any tool that can be held up to the wheels!
- Please read the instructions and feel free to call Razor Sharp Edgemaking System at 1-866-419-4879 with any questions or concerns that you may have.
- For more information – [email protected]
- For answers to technical questions or problems – [email protected]
